Sncuinagsbbiznfealascd99.3±0.10.7±0.1< 0.01< 0.0001< 0.02< 0.01< 0.005< 0.02< 0.02< 0.03< 0.002the Sn99.3cu0.7 Lead Free Solder Bar Is Made Up Of 99.7% Tin And 0.7% Copper. It Is Desirable For Use In Common Metal Equipment, Copper Tubes, And Copper Plates. This Product Is A Conventional Type Of Environmentally-friendly Solder By Adoption Of Lead-free Soldering Technology.as A Typical Type Of High-temperature Lead Free Tin Bar, Our Sn99.3cu0.7 Lead Free Solder Has The Melting Point Of Approximately 227 Degrees Celsius. It Is Suitable For Both Wave Soldering And Dip Soldering Processes, Which Call For Environmental Protection. During The Soldering Process, This Product Features Nice Liquidity. It Can Substantially Reduce Various Technical Problems, Such As Bridging, Icicle, Solder Spatter, And More.featureseutectic Alloy.bridge-free And Icicle-free Soldering.smooth, Bright, Well-formed Fillets, Free Of Gross Micro-cracks, Irrespective Of The Cooling Rate.good Through-hole Penetration.good Topside Fillet Formation.dross Rate Equal Or Lower Than Tin-lead Solder.does Not Require A Nitrogen Atmosphere.does Not Erode Copper From Holes, Pads And Tracks.low Rate Of Copper Leaching Makes It Easy To Control The Copper Content Of The Solder Bath.lower Aggressiveness To Stainless Steel And Other Solder Pot Materials As Compared To Tin-silver-copper Alloys.thermal Fatigue Resistance And Creep Strength Better Than Tin-lead.slow, Even Growth Of The Intermetallic Layer At The Solder/substrate Interface.also Performs Well In Selective And Dip Soldering.applicationsdip Soldering Or Wave Soldering Of Electronic Components Such As Pcba, Thtsoldering Of Metals, Such As Copper Roofing Joineryassembly Of Stained Glass, Silver Jewelry Etcother Generally Tinning Purpose....
Reniso Ultracool 68 Is Used For Ammonia Refrigeration Plants With Deep Evaporation Temperatures Down To < -45 °c. Due To Its Thermal Stability, Reniso Ultracool 68 Avoids The Formation Of Oil Deposits And Sludge In The Compressor. According To This, Maintenance Costs Of The Refrigeration Plant (filter Replacement, Inspection Work Etc.) Can Be Considerably Reduced. Reniso Ultracool 68 Shows An Outstanding Low Evaporation Rate Which Is Significantly Lower Than That Of Conventional And That Of Hydro Treated Mineral Oils. In Practice, This Means That There Is Less Oil Loss In The Compressor (lower Oil Carry-over) Which Ends Up In Lower Oil Top-up Volumes. This Is Also An Important Point With Regard To Cost Savings In The Refrigeration Plant. Reniso Ultracool 68 Combines The Very Good Cold Flow And High Temperature Properties Of Synthetic Hydrocarbons With Good Elastomer Properties (good Compatibility With Cr Sealants) As They Are Only Known From Mineral Oil Products.reniso Ultracool 68 Is Nsf H2 Registered.viscosity Grade: Iso Vg 68...
ETHIOPIA YELLOW PAGESONLINE 
