FDS-0301 LPG Copper Corrosion Tester

Scope

LPG copper corrosion tester used by SH / T0232-92 "LPG copper corrosion test method" standard, measuring LPG copper corrosion.

LPG copper corrosion tester line with international standards ISO6251: 1982 "LPG copper corrosion test methods."

Features

1. A, B valve controlled by 1Cr18Ni9Ti material, pressure 7.0Mpa.

2. The cylinder is held by 1Cr18Ni9Ti material, the use of O-rings and double sealing copper pad, the capacity of about 160 milliliters.

3. 1Cr18Ni9Ti material from the water bath, while put two test cylinder. Install an electric heater in the bath and electric stirring device, automatic temperature control by the temperature, can meet the test temperature 40 ± 0.5 ℃. One can put two test cylinder.

4. Temperature control and timing device with automatic control, digital display, responsive, accurate temperature control, time setting from 0 to 999 points.

5. The agitator by the motor, stirring shaft, leaf composition, low noise, high efficiency.

Technical Parameters

1. Constant temperature water bath:

(1) Heating power: 800W          

(2) Temperature Accuracy: 40°C± 0.5°C

2. Mixing motor power: 15W

3. Stirring motor speed: 1250 r / min

4. The cylinder pressure greater than 7.0MPa

5. Thermometer: 0 ~ 50 °C, indexing is 0.1°C